It’s possible you’ve heard changing a fuel filter is an easy job. (“You just need a screwdriver!”) However, any time you are handling raw fuel there is a risk of fire, and modern vehicles have fuel systems that are under a lot of pressure. The truth is changing a fuel filter used to be a relatively simple task. With newer cars it’s is much more difficult, and best left to an experienced mechanic. Read on to learn why.
DIYing a Fuel Filter Change isn’t Worth the Hassle or Hazard
On older vehicles, the fuel filter was located right in the engine compartment, making it easy to access and change. Since the 1980s and 90s, most fuel filters are located under the car on the frame rail, and some are located inside the gas tank. It’s also likely you’ll need more than just a screwdriver to get the job done. Removing a modern fuel filter often requires specific wrench sizes, and a lift makes a huge difference in getting the job done efficiently.
There’s also the danger of handling raw fuel. If you don’t properly relieve built up pressure with the fuel pressure relief valve, when you loosen the fittings, fuel will spray everywhere. To stay safe, you also need to have some type of container to catch any gas that might leak out.
If it’s time to change your vehicle’s fuel filter, come by Aardvark Automotive to get the job done right, with no headaches, hassles, or hazards for you!